Blog

Programming the nRF Sniffer for Bluetooth LE firmware

In the guide, we make an ISP (in-system programmer) from an Arduino Uno and some breadboard wires. Both are fairly inexpensive items and common for hobbyists, where this may be an attractive option to some.

If you do this for the first time, those screws might be bolted very firmly, so make sure you use the hex driver with the long end as leverage. Alternatively you may want to watch the video, embedded above. The ttyUSB0 is the port to communicate with the motherboard. The firmware transfer process should take about a minute. Then, make sure the port is still selected as Sanguino or Sanguino (1284P Boards), the programmer is Arduino as ISP, and the proper serial port is selected.

• This iteration may become tedious if you decide to do it by trial and error instead of measuring with a caliper, so it may be useful to use Repetier Host in order to make things a little smoother.
• If you’re using an Ender 3 V2, then there’s a different guide for updating firmware on the Ender 3 V2.
• Based on the machine’s original firmware, these are templates that can be used as-is or customized to your preference.
• This guide is intended to help users update firmware from pre-compiled files.

As each use case is different, embedded software is tailor-made to work around hardware constraints. The firmware acts as a bridge between drivers (operating system) and hardware. It’s a connector that ensures both sides work with each other to get the job (or functionality) done.

It has been reviewed by the development team, passed all automated test suites, and in most cases, if significant changes have been made, test flown. This code gets built daily and is available for testing by experienced users. This corresponds to an “alpha” release, and may have bugs, although very rarely “crash inducing”. Very shortly after an addition that changes or introduces a feature is added, the Upcoming Features section of the Wiki is updated with information about the addition or change. Most often, these boards have another autopilot software pre-installed. (If the board has ArduPilot already installed, see Loading Firmware for firmware loading instructions. Any of the technique in the JTAG Reference can be used, such as the Particle Debugger, ST-LINK/v2 (for Gen 2), or Segger J-Link, to flash hex files to your devices.

After doing the build with “Auto Build Marlin” you can click on the little folder icon to reveal the built firmware file. Should you wish to make changes before compiling the firmware, now is the chance to do so. Configuration.h file holds the common settings, also get official firmware free and despite the file extension, it can be modified with a standard text editor. In my case, I have a Creality Ender 3 with a BIGTREETECH SKR Mini E3 2.0 board installed.